The bridge in the Crimea began the construction of pillars in the sea

Мост в Крым: началось строительство опор в море

Мост в Крым: началось строительство опор в море

Мост в Крым: началось строительство опор в море

Мост в Крым: началось строительство опор в море

Мост в Крым: началось строительство опор в море

Мост в Крым: началось строительство опор в море

Мост в Крым: началось строительство опор в море

Мост в Крым: началось строительство опор в море

Work is being done at the Western tip of the island of Tuzla, as well as between him and the eponymous braid.

Through the Kerch Strait, Russia began to build the bridge supports on sea areas, according to Rosavtodor.

Work is being done at the Western tip of the island of Tuzla, as well as between him and the eponymous braid. Builders hammer in piles under the supports that will lift above the water road part of the bridge. Prior to that, the construction was carried out on the land plots.

The Foundation of each of the supports 12 is formed of tubular piles with a diameter of 1420 mm. Piles immersed in specific sections of metallic pipe which are welded to each other by way of electric arc welding.

“Construction and installation works in the waters of being away from the coastal zone at depths greater than 4 metres (from water level to the bottom)”, – stated in the message.

On 12 April, the builders erected the first pillar of the bridge across the Kerch Strait under a car track on the island of Tuzla.

And on April 13 it became known that the construction of the railway across the Kerch Strait to Crimea will be completed later than scheduled.

11 may the President of Russia Vladimir Putin gave the command to launch the last, the fourth leg of the power bridge to the Crimea.

The astronaut showed the Kerch bridge from space

Source